Motorola CP1660 setting frequency without software

This time we will try the Motorola HT-type setting CP1660VHF by directly setting the Htnya without using software ...

You do this as follows:

The first thing you should do is change the configuration of the USER becomes DEALER

1. Turn off the radio, then ON the radio and immediately as soon as you press the 4 button 6 times. On Radio will appear on the display USER or DEALER

2. Select a dealer or user by pressing> or <... To get into the program menu you must select a dealer and press the PTT to save. Furthermore Turn off radio. 

3. Now we will enter the program. In the position of the radio OFF, press and hold the button 3 ... Then turn on the radio display will appear on the main menu: Backlight> Battery> Accesory> Tone volume> Programmable button> Channel> Scan> Scrambling> Phone> Call> back to Backlight.

Remarks:

- To display the next menu press the menu below press the PTT

- To return to the previous menu press 3

4. Then Press> or <select channel, press the PTT once ACTIVATE it will appear, press PTT once and select the channel to be activated, press once to activate the ENABLE PTT, PTT Press again to save it, SAVED.

5. Fill Frequency ... Back to the Main menu >> Select channel> select RX Freq> Select Channel> enter the frequency (eg, 146 820)> saved ... Return to the previous menu select the TX Frequency> Select Channel> Enter the frequency (eg 146 220)> saved ... back to the main menu and turn off the radio

If you want the setting via computer, software click Here

thanks